After that, when the device is re-connected, it should power on and it should start working. If this type of interface is still required, no further troubleshooting needs to be performed but if the device needs to work under USB Keyboard emulation, the device needs to be reset to defaults and programmed for the appropriate type of emulation. Using the Windows 10 driver, the scanner name is not displayed correctly, as well not all features of the scanner is supported.
If you get Error " system cannot find the path specified " during driver installation create a local admin account and install it under that account. File 1. Force com port. File 2. File 3. File 4. Number of Views 5.
Number of Views 11K. Number of Views Click here to Download Once the driver has been downloaded. Unzip the content in a new folder Open the containing folder and right-click on the setup. Scan the configuration Barcodes There are 2 barcodes you must scan to properly set-up the scanner. Once you finish scanning all the barcodes, unplug the scanner and plug it back in: Scan the following barcode to enable the Serial Emulation Mode. Once you do that you should hear a beep: Scan the following barcode to enable the CR Suffix: This Scanner doesn't have the screen reading feature.
For manual click here 4. You will need this number later 5. Double click on the. Click OK to continue. Create a Connection Key in your Portal Before you continue with the installation process, you have to create a connection in your online portal.
Go to the system tray located at the bottom right corner of the screen and right-click on the check-in client icon. Select Serial and enter the Reader Name. Skew Maximum Brightness Scan Pattern Omni-Directional. Scanning Range Standard range SR. Print Contrast Hardware Engine Type 1D Laser. Standby Current mA. Manuals and Guides Name. Service Terms Warranty Duration 3 yr.
Others Power Connector Type Corded. Features Form Factor Counter Top. Pitch Skew Maximum Brightness Scanning Range Standard range SR.
Print Contrast
0コメント