Alarm lock pg21 pdf

Baseplate must be mounted far enough away from the. Use the four corner. Certain narrow-stile doors require only two holes for the. Hole locations. External Wiring. Mark and drill the hole shown on the. Knock out the necessary holes from the Baseplate and.

Temporarily mount the Housing Cover into the Base-. Mount as follows: Remove all keys from cylinder thus. Hold the. Housing Cover vertically with the inside facing toward you. Note: Each time the Hous-. Hook the Housing Cover into the. Note: If the switch is in the wrong position. Previous Page. Next Page. Sounding Device: Piezo electronic sounder sweep siren, The PG21 is a microprocessor-controlled door alarm for sur- steady or pulsing, dB at 10 feet face mounting on a door or door frame.

Leave in the internal battery as a backup Assembly battery. Page 3 door is closed within that two minute period. Jumper moved to the "lower" position disables the timeout, keeping the siren on until manually reset.

Slowly slide the Magnetic Sweep tions Set a different siren sound for each door in order to easily identify which door has been accessed. Print page 1 Print document 8 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? For more information, visit Keypad-controlled narrow stile door alarm, similar to PG21, plus. Alarm Lock Systems is a leader in access and egress solutions for education,.

This Alarm Lock PG21 door alarms are for surface mounting on a door or door frame. It is generally used in applications such as emergency fire escape doors. Send us a picture. Model PG10 The Pilfergard Model PG10 is an exit door alarm designed to deter the use of qlarm secured door by sounding a twin action alarm when opened by unauthorized personnel. Press command or control to select multiple files Now fill your information below and we will get back to you shortly.

To remove key, turn back to arm alrm, thus keeping unit armed always. Always armed mode — when key is turned counter clockwise to the disarm position, the key cannot be removed. Use the menu on the right to select available options. Continuous power with the addition lick an external power supply. Continuous power with the addition of an external power supply Multiple door monitoring permitted with built-in external reed switches Status Indicator — The LED will indicate RED when armed.

To remove key, turn back to arm mode, thus keeping unit armed always. Accessories Rim Cylinder QH Such doors are often found leading to an emergency fire escape, nursing home stairwells or rear restaurant and lck doors.

Available in metallic silver only. Press command or control to select multiple files. Its test button verifies battery. Metallic silver or duronodic finish. For exterior key control, optional RIM cylinder may be used. No returns can be accepted on special order products. Turning key clockwise will arm and key can be removed. Have a question about this product? Max-Flex Terminals, allowing for any or all of the following: Sleek model design key-activated door alarm for use on standard size and narrow stile doors.

Always armed mode when key is turned counter clockwise to the disarm position, the key cannot be removed. Requires standard mortise cylinder not supplied. Your Cart is empty, time to fill it.

Visit Our Other Sites. Continuous power with the addition of an external power supply Multiple door monitoring permitted with built-in external reed switches Status Indicator The LED will indicate RED when armed. Text a picture of your item to or email to info qualifiedhardware.

This durable surface mount unit is easily installed and is tamper-supervised with two separate tamper switches. An exit alarm on these doors will discourage their use when unauthorized and will notify authoritative personnel when misused. Consumer Support Non-Locking Professionals, click here to get a factory-trained specialist in your area. Dual piezo siren measured at 95db. The alarm can be bypassed from inside or outside by the use of a key.